Panasonic KX-NS1000, Руководство по установке

Страница: 382 / 416

PC Programming Manual References
27.2.4 Router Configuration—Setup—[1-2-4] WAN—Dynamic DNS
8.6.5 DNS Client
Description
When a device on the LAN requests a domain name resolution, the DNS client queries an outside DNS server
and then forwards the results to the requesting device. With this feature, devices on the LAN can convert
domain names into IP addresses, and determine what domain name is associated with an IP address.
Once a domain name has been resolved, this information is temporarily stored in a local cache. If a query is
made for the same information, the PBX responds with the information stored in its cache.
KX-NS1000
Built- in
Router
Switching
Hub
INTERNET
PC
IP-PT
DNS Server
DNS Server
Conditions
•
A primary and secondary DNS server can be specified in the WAN-side network settings. The PBX will
query the primary DNS server first. If that query fails, the PBX queries the secondary server.
•
For details about what values to use for the DNS client settings, consult the network administrator.
•
When the built-in router is enabled, it is not possible to access a DNS server at a different site over a VLAN.
Since communication over a VPN will not be possible, do not set a destination IP address in the VPN for
the following settings:
–
27.2.1 Router Configuration—Setup—[1-2-1] WAN—Connection Settings
→
Preferred DNS IP Address
→
Alternative DNS IP Address
–
28.1 Network Service—[1] IP Address/Ports
→
DNS Setting—Preferred DNS IP Address
→
DNS Setting—Alternative DNS IP Address
Either set up a DNS server at each site, or specify a DNS server on the WAN side.
PC Programming Manual References
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property—Main— SIP Server Name
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property—Register — Registrar Server
Name
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property—NAT—
STUN
Server—Name
382 Installation Manual
8.6.5 DNS Client