Panasonic KX-NCP500, Руководство по программированию ПК, Страница: 163 / 892

3.15 [1-1] Slot—Port Property - Virtual IP Extension
Various settings can be programmed for each virtual IP extension port.
To change the status of virtual IP extension ports, click
Command .
IP-PT Registration and De-registration
An IP-PT must be registered to the PBX by programming the PBX and IP-PT before it can be used.
Programming instructions for the PBX are given below.
It is possible to de-register the IP-PT later.
Preparation
Open 3.4 [1-1] Slot—Card Property - IPCMPR, and confirm that the IP addresses of the IPCMPR and DSP
cards, subnet mask address, and default gateway address are set.
Registration
Follow the steps below to register the IP-PT.
1.
Connect the IP-PT to be registered to the network and, if necessary, the power supply.
2.
Click Registration .
A dialog box will appear. Non-registered (available) extension numbers and names are displayed on the
left.
3.
Highlight numbers and names and click the right arrow to select them for registration. Click Next .
4.
Click Next .
5.
If the registration is still in progress, the dialog box will show "Registration Executing".
If the registration is successful, the dialog box will show "Registration Completed". Click
Close .
Once the IP-PT is successfully registered, the status of the IP-PT will update to show "Registered".
De-registration
Follow the steps below to de-register the IP-PT.
1.
Click De-registration .
A dialog box will appear. Registered extension numbers and names are displayed on the left.
2.
Highlight numbers and names and click the right arrow to select them for de-registration. Click Next .
A dialog box will appear.
3.
Click Confirm .
If the de-registration is successful, the dialog box will show "De-registration Succeed".
4.
Click Close .
Once the IP-PT is successfully de-registered, the status of the IP-PT will update to show "None".
Forced De-registration
Follow the steps below to forcibly de-register the IP-PT when normal de-registration has been unsuccessful
or IP address settings have been changed or deleted only on the IP-PT.
1.
Click Forced De-registration .
A dialog box will appear. Registered extension numbers and names are displayed on the left.
2.
Highlight numbers and names and click the right arrow to select them for forced de-registration. Click
Next .
A dialog box will appear.
Document Version 2009-12 PC Programming Manual 163
3.15 [1-1] Slot—Port Property - Virtual IP Extension