Panasonic KX-NCP500 Скачать руководство пользователя страница 324 | Manualshive

Страница: 324 / 422

Panasonic KX-NCP500 Скачать руководство пользователя страница 324

Feature Manual References

21.1 Capacity of System Resources

Operating Manual References

1.3.63 Speed Dialing, System
1.4.1 Call Log, Incoming
1.4.3 Directories
3.1.2 Personal Programming
3.3 System Programming

16.1.9 SVM (Simplified Voice Message)

Description

This feature provides simple answering machine features for extensions.

Features for an extension user with a message box:

An extension user can record a personal greeting message to greet a caller and ask him to leave a voice
message. The user can also play back and clear greeting messages and the voice messages left by callers.

Feature for a caller:

A caller can leave a voice message after hearing the greeting message.

SVM/OGM Block on the MPR Card

The MPR card has a built-in SVM/OGM Block. This block can be used either for the SVM feature, for the OGM
feature (

®

12.1.2 OGM (Outgoing Message)), or both. When used for the SVM feature, this block is assigned

a floating extension number (default: 591). Two channels are available, allowing two users to access this
feature at the same time.
When an extension is assigned to this feature through system programming, a message box is created for that
extension. This message box is used to store greeting messages and voice messages for the extension. Each
proprietary telephone (PT), single line telephone (SLT), and portable station (PS) can be assigned its own
message box.

[Example]

MPR

SVM : Floating Extension No. 591 (default)

Message Box for

Extn. 101

Message Box for

Extn. 102

Message Box for

Extn. 103

Message Box for

Extn. 210

2 CH

ESVM4 Card

Like the SVM/OGM block on the MPR card, an ESVM4 card, mounted on an OPB3 card, can be used either
for the SVM feature, for the OGM feature, or both.
An ESVM4 card (4 channels) contains two blocks of data. Up to four ESVM4 cards (max. 16 channels) can be
installed in the PBX.
Only up to 2 ESVM4 cards (max. 8 channels) can be used for the SVM feature per system. In this case, each
card is assigned a floating extension number rather than the SVM/OGM block on the MPR card. The rest of
the channels must be used for OGM feature purposes. For more information on using an ESVM card with an
OPB3 card, refer to the Installation Manual.
When using an ESVM4 card for the SVM feature, it must be mounted on sub-slot 3 of the OPB3 card. For more
information on using an ESVM4 card with an OPB3 card, refer to the Installation Manual.

324

Feature Manual

Document Version 2013-05

16.1.9 SVM (Simplified Voice Message)

«
...
322
323
324
325
326
...
»

Содержание KX-NCP500







































































































































































































































































































































































































































Отзывы:

Нет отзывов