14. General Information
85
ITU-T No.1 Test Chart
Note:
L
Design and specifications are subject to change
without notice.
L
The pictures and illustrations in these instructions
may vary slightly from the actual product.
L
The accuracy of the clock is approximately
±
60
seconds a month.
Recording paper specifications
Recording paper size:
Letter: 216 mm
×
279 mm (8
1
/
2
"
×
11")
Legal: 216 mm
×
356 mm (8
1
/
2
"
×
14")
A4: 210 mm
×
297 mm (8
1
/
4
"
×
11
11
/
16
")
Label size:
Letter: 216 mm
×
279 mm (8
1
/
2
"
×
11")
A4: 210 mm
×
297 mm (8
1
/
4
"
×
11
11
/
16
")
Recording paper weight:
60 g/m
2
to 90 g/m
2
(16 lb. to 24 lb.)
Note for recording paper:
L
We recommend that you test paper (especially
special sizes and types of paper) on the unit before
purchasing large quantities.
L
Do not use the following types of paper:
–
Paper with cotton and/or fibre content that is over
20 %, such as letterhead paper or paper used for
resumes
–
Extremely smooth or shiny paper, or paper that is
highly textured
–
Coated, damaged or wrinkled paper
–
Paper with foreign objects attached, such as tabs
or staples
–
Paper which has dust, lint or oil stains
–
Paper that will melt, vaporize, discolour, scorch or
emit dangerous fumes near 200
°
C (392
°
F),
such as vellum paper. These materials may
transfer onto the fusing roller and cause damage.
–
Moist paper
–
Inkjet paper
L
Some paper only accepts print on one side. Try using
the other side of the paper if you are not happy with
the print quality or if misfeeding occurs.
L
For proper paper feeding and best print quality, we
recommend using long-grained paper.
L
Do not use paper of different types or thickness at the
same time. This may cause paper jams.
L
Avoid double-sided printing.
L
Do not use paper printed from this unit for double-
sided printing with other copiers or printers. This may
cause paper jams.
L
To avoid curling, do not open paper packs until you
are ready to use the paper. Store unused paper in
the original packaging, in a cool and dry location.
■
Power supply:
120 V AC, 60 Hz
■
Memory capacity
(for operation and storing memory):
32 MB
■
Fax memory capacity:
2 MB in total
Approx. 170 pages of memory reception
Approx. 150 pages of memory transmission
(Based on the ITU-T No. 1 Test Chart in standard
resolution, without using the Error Correction Mode.)
■
Laser diode properties:
Laser output: Max. 5 mW
Wave length: 760 nm – 810 nm
Emission duration: Continuous
■
Print speed:
Approx. 18 ppm (pages per minute)
■
Printing resolution:
600
×
600 dpi
*1 Transmission speed depends on the contents of the
pages, resolution, telephone line conditions and
capability of the other party’s machine.
*2 Transmission speed is based on the ITU-T No. 1 Test
Chart with original mode. If the capability of the other
party’s machine is inferior to your unit, the
transmission time may be longer.
MB781C-PFQX2742ZA-OI-en.book Page 85 Tuesday, September 4, 2007 1:24 PM