2. Preparation
19
Volume
2.6 Adjusting volume
Before adjusting volume, set the operation mode to fax
mode (page 16).
Ringer volume
While the unit is idle,
press
{V}
or
{^}
.
L
If there are any documents in the document
entrance, you cannot adjust the volume. Confirm that
there are no documents in the entrance.
To turn the ringer OFF
Press
{V}
repeatedly to display
“
RINGER OFF= OK?
”
.
i
{
SET
}
L
The unit will not ring.
L
To turn the ringer back ON, press
{^}
.
Ringer pattern
L
You can select one of 3 ringer patterns (feature #161
on page 50).
Monitor volume
While using the monitor,
press
{V}
or
{^}
.
Initial Programming
2.7 Date and time
1
{
MENU
}
i
{#}{
1
}{
0
}{
1
}
i
{
SET
}
M:
|
01/D:01/Y:07
TIME: 12:00AM
2
Enter the current month/date/year/hour/minute by
selecting 2 digits for each.
Example: August 10, 2007 10:15 PM (12 hour
clock format)
1.
Press
{
0
}{
8
}
{
1
}{
0
}
{
0
}{
7
}
{
1
}{
0
}
{
1
}{
5
}
.
M:
|
08/D:10/Y:07
TIME: 10:15AM
2.
Press
{*}
repeatedly to select
“
PM
”
.
3
{
SET
}
4
Press
{
MENU
}
to exit.
Note:
L
The other party’s fax machine will print the date and
time on the top of each page you send according to
your unit’s date and time setting.
L
If you have selected French as the language (feature
#110 on page 49), the time is set using a 24 hour
clock.
Example: 15:15
Press
{
1
}{
5
}
{
1
}{
5
}
.
L
After setting the date and time, if the unit is in the
copy mode, change it to the fax mode by pressing
{
FAX
}
. You can check your unit’s date and time
setting on the display.
To correct a mistake
Press
{
<
}
or
{
>
}
to move the cursor to the incorrect
number, and make the correction.
If you have subscribed to a Call Display service
The date and time will be automatically set according to
the received caller information.
L
If the time has not previously been set, Call Display
will not adjust the clock.
L
You can turn this feature OFF (feature #226 on page
50).
{V}{^}
{
SET
}
{
<
}{
>
}
{
SET
}
{
FAX
}
{
MENU
}
MB781C-PFQX2742ZA-OI-en.book Page 19 Tuesday, September 4, 2007 1:24 PM
