background image

2

Press 

MCN

 or 

MDN

 repeatedly to display the desired

item.

3

M

ERASE

N

 (soft key)

4

Yes

 

A

 

M

SELECT

N

 (soft key) 

A

 

M

OFF

N

7.4 Storing caller information

7.4.1 Into the one-touch dial feature and
phonebook (Base unit)

R

Make sure that the 

M

Fax

N

 light is ON.

1

M

Caller ID

N

2

Press 

MCN

 or 

MDN

 repeatedly to display the desired

item.

3

M

Menu

N

4

Select the station key or phonebook.

For station 1-2:
1.

Press the desired station key.

2.

Press 

MCN

 or 

MDN

 repeatedly to select 

DIAL

MODE

A

 

M

Set

N

 

A

 

M

Set

N

For station 3:

Press the station key. 

A

 

M

Set

N

For station 4-6:

Press 

M

Lower

N

, then press the desired station key.

A

 

M

Set

N

For phonebook:

Press 

MFN

 or 

MEN

A

 

M

Set

N

5

M

Set

N

Note:

R

To edit a name or number, see page 52.

R

If you assign an item to a station key which already
contains an item, the previous item will be replaced.

R

Station 1 and 2 can be used alternatively as
broadcast keys (page 59).

R

One-touch dial items are only displayed in the base
unit’s phonebook.

R

Phonebook items stored with the base unit are
displayed in 

Group 1

 of the cordless handset’s

phonebook (KX-MB2060 optional).

7.4.2 Into the phonebook (Cordless handset,
KX-MB2060 optional)

1

M

CID

FN

2

Press 

MCN

 or 

MDN

 repeatedly to display the desired

item.

R

To edit the number, press 

M

EDIT

N

 (soft key)

repeatedly until the telephone number is shown
in the desired format.

3

M

SAVE

N

 (soft key)

4

Phonebook

 

A

 

M

SELECT

N

 (soft key) 

A

 

M

OK

N

(soft key) 

A

 

M

OK

N

 (soft key)

5

Press 

MCN

 or 

MDN

 repeatedly to display the desired

group. 

A

 

M

SELECT

N

 (soft key)

6

M

SELECT

N

 (soft key) 

A

 

M

OFF

N

Note:

R

To edit a name or number, see page 52.

56

7. Caller ID

Содержание KX-MB2060

































































































































































Отзывы: