Panasonic KX-MB2060, Руководство по эксплуатации

Страница: 112 / 160

Display Cause & Solution
“
REMOVE PAPER IN INPUT
TRAY #2
”
R The recording paper is installed in the manual input tray when trying to
receive faxes or print reports. Remove the recording paper from manual
input tray.
“
REPLACE DRUM CHANGE
SUPPLIES
”
R The drum cartridge’s service life is finished. Replace the drum cartridge and
the toner cartridge immediately.
“
RX MEMORY FULL
” R The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Load paper (page 16) or remove the jammed
paper (page 126).
R If the PC fax (feature #442 on page 86) is set to “
ALWAYS
” ,
– check the connection between the computer and the unit.
– check that the computer is turned ON.
R If the fax preview mode (feature #448 on page 66) is set to “ ON ” ,
– view, print or save the received fax documents using the web browser
on the computer connected via the LAN, and then erase the
unnecessary documents (page 66).
– turn the setting to “
OFF
” . The fax documents stored in memory will be
printed automatically.
“
SCANNER POSITION
ERROR
”
R There is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
“
SERIAL ERROR
” R There is something wrong with the unit. Contact our service personnel.
“
SUBSCRIBE TO CALLER ID
” R You must subscribe to use Caller ID service. Contact your service provider/
telephone company for service availability. Once you receive caller
information, this message will not be displayed.
“
TONER EMPTY
”
“
CHANGE SUPPLIES
”
R The toner is empty. Replace the toner cartridge immediately.
“
TONER LOW
”
“
CHANGE SUPPLIES
”
R The toner is reaching the end of its life. You will need to replace the toner
cartridge soon.
“
TOP COVER OPEN
” R The top cover is open. Close it.
“
TRANSMIT ERROR
” R A transmission error occurred. Try again.
14.2.2 Cordless handset (KX-MB2060 optional)
Display Cause & Solution
“
Base no power
”
or
“
No link. Re-connect
base AC adaptor.
”
R The cordless handset has lost communication with the base unit. Move
closer to the base unit and try again.
R Turn the base unit’s power switch OFF to reset the unit. Turn the power
switch ON and try again.
R The cordless handset’s registration may have been canceled. Re-register
the cordless handset (feature #130 on page 104).
“
Busy
” R The called unit is in use.
R Other units are in use and the system is busy. Try again later.
R The cordless handset you are using is too far from the base unit. Move closer
and try again.
“
Call phone company for
your access #
”
R You have not stored the voice mail access number. Store the number
(page 101).
“
Error!!
” R Recording was too short. Try again.
“
Invalid
” R There is no cordless handset registered to the base unit matching the
cordless handset number you entered.
R The cordless handset is not registered to the base unit. Register the cordless
handset (feature #130 on page 104).
112 For assistance, please visit http://www.panasonic.com/help
14. Help