Note:
R
Depending on the environment where this
handset is being used, this feature may not
be effective.
R
This feature is not available using the
speakerphone.
Handset equalizer
This feature clarifies the voice of the person
you are talking to, producing a more
natural-sounding voice that is easier to hear
and understand.
1
Press
M
MENU
N
while talking.
2
MbN
:
“
Equalizer
”
a
M
SELECT
N
3
MbN
: Select the desired setting.
a
M
OK
N
Note:
R
Depending on the condition and quality of
your telephone line, this feature may
emphasize existing line noise. If it becomes
difficult to hear, turn this feature off.
R
This feature is not available while using the
speakerphone.
R
When both the
“
Equalizer
”
setting and
noise reduction are activated,
is shown
on the display.
Call share
You can join an existing outside call.
To join the conversation, press
M
N
when
the other unit is on an outside call.
Note:
R
A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions.
(3-way conference)
R
To prevent other users from joining your
conversations with outside callers, turn
privacy mode on (page 27).
Transferring calls, conference
calls
Outside calls can be transferred or a
conference call with an outside party can be
made between 2 handsets.
1
During an outside call, press
M
MENU
N
.
2
MbN
:
“
Intercom
”
a
M
SELECT
N
3
When 3 or more handsets are
registered:
MbN
: Select the desired unit.
a
M
SELECT
N
When only 2 handsets are registered:
Continue to the next step.
4
Wait for the paged party to answer.
R
If the paged party does not answer,
press
M
BACK
N
to return to the outside
call.
5
To complete the transfer:
Press
M
OFF
N
.
To establish a conference call:
M
MENU
N
a
MbN
:
“
Conf.
”
a
M
SELECT
N
R
To leave the conference, press
M
OFF
N
.
The other 2 parties can continue the
conversation.
R
To put the outside call on hold:
M
MENU
N
a
MbN
:
“
Hold
”
a
M
SELECT
N
To resume the conference:
M
MENU
N
a
MbN
:
“
Conf.
”
a
M
SELECT
N
R
To cancel the conference:
M
MENU
N
a
MbN
:
“
Stop conference
”
a
M
SELECT
N
You can continue the conversation
with the outside caller.
Note:
R
You can also select your mobile device in
this feature using a handset, if your mobile
device is registered to the hub. For more
information, refer to the User’s Guide
(page 42).
Handset locator
You can locate a misplaced handset by
paging it.
1
Hub:
Press
M
A HANDSET/
LOCATOR
N
.
R
All registered handsets beep for 1
minute.
2
To stop paging:
Hub:
Press
M
A HANDSET/LOCATOR
N
.
Handset:
Press
M
OFF
N
.
18
For assistance, visit www.panasonic.ca/english/support
Making/Answering Calls
HNH100C_(en_en)_0130_ver.202.pdf 18
2017/01/30 16:12:23