Resetting the
camera
Use this procedure if you have
trouble setting up the camera.
1
Plug in the camera.
2
Using an object with a thin tip,
press and hold the reset
button on the back of the
camera for about 10 seconds,
then release the button when
the camera beeps.
R
ESET
R
ESET
R
The camera’s settings are
reset.
3
Wait for the camera’s LED to
light in green.
Note:
R
After resetting the camera, you
cannot use the camera again
until it is set up. Refer to the
relevant page in this section to
set up the camera.
25
Setup
