Panasonic KX-HNB700, Руководство пользователя

Страница: 55 / 96

1
From the [HomeHawk] app home screen, tap
®
[Settings] .
2
Tap [Camera Settings] and select the desired camera.
3
Tap [Name] .
4
Enter the desired name.
5
When finished, tap [OK] .
Note:
R You can also change these settings by tapping displayed next to camera images in the live
camera image screen ( “Viewing the live camera image screen”, Page 44).
Status LED
You can determine whether the camera’s LED indicator lights or is disabled.
1
From the [HomeHawk] app home screen, tap
®
[Settings] .
2
Tap [Camera Settings] and select the desired camera.
3
Tap [System] .
4
Slide the [Status LED] switch to the desired position.
Note:
R You can also change these settings by tapping displayed next to camera images in the live
camera image screen ( “Viewing the live camera image screen”, Page 44).
Updating firmware
You can use this feature to check for a newer version of the camera firmware (i.e., system software). If a
newer version is found, you can update the firmware.
Important:
R Make sure to fully charge the camera before updating its firmware. The firmware may not be able to be
updated if the battery level is low.
1
From the [HomeHawk] app home screen, tap
®
[Settings] .
2
Tap [Camera Settings] and select the desired camera.
3
Tap [System]
®
[Firmware Update] .
R The camera will connect to the Internet and check for a newer version of its firmware.
4
Follow the on-screen instructions.
Note:
R You can also change these settings by tapping displayed next to camera images in the live
camera image screen ( “Viewing the live camera image screen”, Page 44).
Resetting camera settings
1
From the [HomeHawk] app home screen, tap
®
[Settings] .
2
Tap [Camera Settings] and select the desired camera.
55
Using a front door camera and outdoor camera