manualshive.com logo in svg

Panasonic KX-HDV430, Руководство администратора, Страница: 290 / 336

Поделиться
Скачать
Panasonic KX-HDV430 Скачать руководство пользователя страница 290

Description

Specifies whether to enable the Shared Call feature of the SIP server,
which is used to share one line among the units.

Note

•

Availability depends on your phone system.

Value Range

•

Y

 (Enable shared call)

•

N

 (Disable shared call)

Note

•

If set to "

Y

", the SIP server will control the line by using a

shared-call signaling method.

•

If set to "

N

", the SIP server will control the line by using a

standard signaling method.

Default Value

N

Web User Interface Reference

Enable Shared Call

SHARED_STOP_LINE_SEIZE

Value Format

BOOLEAN

Description

Specifies whether to stop seizing the Shared Call line at the unit side.

Value Range

•

Y

: Stop seizing the line

•

N

: Seize the line

Default Value

N

FWD_DND_SYNCHRO_ENABLE_n

Parameter Name Example

FWD_DND_SYNCHRO_ENABLE_1

, 

FWD_DND_SYNCHRO_ENABLE_2

,

…, 

FWD_DND_SYNCHRO_ENABLE_16

Value Format

BOOLEAN

Description

Specifies whether to synchronize the Do Not Disturb and Call
Forward settings, configured via the Web user interface or phone
user interface, between the unit and the portal server that is provided
by your phone system dealer/service provider.

Note

•

Even if you specify "

Y

", this feature may not function properly if

your phone system does not support it. Before you configure
this setting, consult your phone system dealer/service provider.

Value Range

•

Y

 (Enable Do Not Disturb/Call Forward synchronization)

•

N

 (Disable Do Not Disturb/Call Forward synchronization)

Default Value

N

Web User Interface Reference

Enable Key Synchronization (Enable Key Synchronisation)

5.3.34 Call Control Settings

290

Administrator Guide

Document Version 2016-05

Содержание KX-HDV430

















































































































































































































































































































































Отзывы:

Нет отзывов