manualshive.com logo in svg

Panasonic KX-FT931LA-B, Руководство по обслуживанию, Страница: 54 / 173

Поделиться
Скачать
Panasonic KX-FT931LA-B Скачать руководство пользователя страница 54

54

KX-FT931LA-B

10 Test Mode

The codes listed below can be used to perform simple checks for some of the unit’s functions. When complaints are received
from customers, they provide an effective tool for identifying the locations and causes of malfunctions. To do this, you set the
Service mode (Refer to 

Operation Flow

 (P.56).) first, then operate the below test items.

Note:

The numbers in the boxes (XXX) indicate the keys to be
input for the various test modes.

Test Mode

Type of Mode

Code

Function

Operation after code 

input

FACTORY SET

Service Mode

“5”  “5”  “0”

Refer to 

Memory Clear Specification

 (P.58).

SET

FLASH MEMORY
CHECK

Service Mode

“5”  “5”  “1”

Indicates the version and checks the sum of the FLASH MEMORY. 

SET

MODEM TEST

Service Mode

“5”  “5”  “4”

Telephone line circuit is connected automatically, output the following signals on
the circuit line. 
1) OFF 2) 9600bps 3) 7200bps 4) 4800bps 5) 2400bps 6) 300bps 7) 2100Hz 
8) 1100Hz

SET

SCAN CHECK

Service Mode

“5”  “5”  “5”

Turns on the LEDs of the CIS and operates the read systems. 
Refer to 

CIS (Contact Image Sensor) Section

 (P.114).

SET

MOTOR TEST

Service Mode

“5”  “5”  “6”

Rotates the transmission and reception motor to check the operation of the motor.
12: FAX TX / Reading memory
52: Recording paper is fed 
22: Copy
44: Recording Paper reverse

 Press 

[STOP]

 button to quit.

SET

LED CHECK

Service Mode

“5”  “5”  “7”

All LEDs above the operation panel board flash on and off, or are illuminated. 

SET

LCD CHECK

Service Mode

“5”  “5”  “8”

Checks the LCD indication. 
Illuminates all the dots to check if they are normal.
Refer to 

Operation Panel Section

 (P.112).

SET

KEY CHECK

Service Mode

“5”  “6”  “1”

Checks the button operation. 
Indicates the button code on the LCD while the button is pressed. Refer to 

But-

ton Code Table

 (P.55).

Refer to 

Operation Panel Section

 (P.112).

START (any key)

MEMORY CLEAR
(except History data)

Service Mode

“7”  “1”  “0”

Refer to 

Memory Clear Specification

 (P.58).

SET

SENSOR CHECK 

Service Mode

“8”  “1”  “5”

If you enter this mode and operate sensor levers with  your hands, the LCD dis-
play of the related sensor (or switch) turns ON / OFF.  Also, when copying a doc-
ument, the related sensor will turn ON / OFF.
For each sensor’s operation, refer to 

Sensors and Switches

 (P.26).

Do Sn Co Jm : LCD DISPLAY

Do: Document set sensor

:Paper inserted.  Turns on when a document is inserted.

Sn: Read position sensor.

:At the read position, turns on when the front cover is opened and the sensor
lever is pressed directory.

Co: Cover open sensor

:Turns on and off when the front cover is opened and closed. 

Jm: JAM sensor

:When JAM sensor is on “Jm” functions.

SET

PRINT TEST PAT-
TERN

Service Mode

“8”  “5”  “2”

Prints out the test pattern.
Used mainly at the factory to test the print quality.
You can select 1~9. (See 

Print Test Pattern

 (P.55))

SET

Содержание KX-FT931LA-B














































































































































































Отзывы:

Нет отзывов