Panasonic KX-FPC91 страница 18 Скачать руководство пользователя

Страница: 18 / 247

1.14.3. INSTALLING THE RECORDING PAPER

Letter* or legal** size recording paper can be loaded. The unit can hold up to 50 sheets of 60 g/m

to 75 g/m

(16 lb. to 20lb.) paper

or 30 sheets of 90 g/m

(24 lb.) paper.

*Letter=216 mm × 279 mm (8 1/2” × 11”)

**Legal=216 mm × 356 mm (8 1/2" × 14")

If you use legal size paper, please purchase a legal paper tray, Model No. KX-FA50 and install it.

For best results, only use inkjet paper such as Hammermill® Jet Print. If you use other types of paper, the print quality may
be affected.

(1) Fan the stack of paper to prevent a paper jam.

(2) Pull the tension bar forward and hold open while inserting

the paper.

The paper should not be over the tab.

If the paper is not inserted correctly, readjust the paper
or the paper may jam.

Note for recording paper:

Avoid paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or paper used for
resumes.

Do not use different types or thicknesses of paper at the same time. This may cause a paper jam.

Avoid extremely smooth or shiny paper that is highly textured.

Avoid paper that is coated, damaged or wrinkled.

Note:

Avoid double-sided printing

Do not use paper printed from this unit for double-sided printing with other copiers or printers, or the paper may jam.

Some paper only accepts print on one side. Try using the other side of paper if you are not happy with the print quality.

Trademarks:

Hammermill® is a registered trademark of INTERNATIONAL PAPER in the United States and/or other countries.

KX-FPC91

Содержание KX-FPC91
























































































































































































































































Результаты поиска

Содержание KX-FPC91

Отзывы:

Похожие инструкции для KX-FPC91

Бренды по названию

Популярные бренды

Panasonic KX-FPC91, Руководство по обслуживанию

Результаты поиска

Содержание KX-FPC91

Отзывы:

Похожие инструкции для KX-FPC91

Бренды по названию

Популярные бренды