2. Preparation
13
2 Preparation
Connections and Setup
2.1 Connections
Caution:
L
When you operate this product, the power outlet
should be near the product and easily
accessible.
L
Be sure to use the telephone line cord included in
this unit.
L
Do not extend the telephone line cord.
Note:
L
If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.
L
If you use the unit with a computer and your internet
provider instructs you to install a filter (
5
), please
connect it as follows.
2.2 Dialling mode
If you cannot dial (page 16, 20), change this setting
depending on your telephone line service.
1
{
MENU
}
i
{#}{
1
}{
3
}
DIAL MODE
=TONE
[
±
]
2
Press
{
1
}
or
{
2
}
to select the desired setting.
{
1
}
“
PULSE
”
: For rotary/pulse dial service.
{
2
}
“
TONE
”
(default): For tone dial service.
3
{
SET
}
4
Press
{
MENU
}
to exit.
1
Telephone line cord
L
Connect to a single telephone line jack.
2
Power cord
L
Connect to a power outlet (220–240 V, 50/60
Hz).
3
[
EXT
]
jack
L
You can connect an answering machine or a
telephone. Remove the stopper if attached.
4
Answering machine (not included)
1
3
4
2
5
{
SET
}
{
MENU
}
FP701FX-PFQX2792ZA-en.book Page 13 Friday, July 13, 2007 3:34 PM
