Panasonic KX-FM89BX страница 121 Скачать руководство пользователя

Страница: 121 / 276

PROBLEM

CAUSE & REMEDY

I cannot scan.

The fax machine may be in use. Try again after the other
operation is completed.

There may not be enough space on the hard disk. Try
after deleting unnecessary files or closing unused applications.

There might not be enough RAM. Try again after closing
some applications. / Restart the PC, and try again.

The document is not pulled into the
document feeder.

Confirm that a maximum of 10 pages are set correctly.

A document is jammed.

You attempted to transmit a document longer than 600
Remove the jammed document and try again.

The recording paper is jammed.

Remove the jammed recording paper, reinsert it, and
again.

Even after clicking [Stop], scanning
continues.

Please wait. It may take a while for the cancel request
accepted.

2.4.4.6. ERROR MESSAGE

PROBLEM

CAUSE & REMEDY

[Initialization failed.] is displayed.

Check the connection of the PC and the fax machine.

The setting of the PC LINK on the fax machine is off.
on.

2.4.4.7. PRINT QUALITY

PROBLEM

CAUSE & REMEDY

The printing quality is poor.

Some paper has instructions recommending which side
print on. Try turning the paper over.

The printing is faint.

You may have used paper with a cotton and/or fiber content
that is over 20%, such as letterhead or resume paper.

A dirty pattern or a black line appears
on the printouts.

The glass or rollers are dirty. Clean them. See the operating
instructions.

2.5. PROGRAMMING AND LISTS

The programming functions are used to program the various features and functions of the
machine, and to test the machine.

This facilitates communication between the user and the service man while programming the
unit.

121

Содержание KX-FM89BX





















































































































































































































































































Результаты поиска

Содержание KX-FM89BX

Отзывы:

Похожие инструкции для KX-FM89BX

Бренды по названию

Популярные бренды

Panasonic KX-FM89BX, Руководство по обслуживанию

Результаты поиска

Содержание KX-FM89BX

Отзывы:

Похожие инструкции для KX-FM89BX

Бренды по названию

Популярные бренды