46
Receiving Faxes
When you are not in, and the AUTO ANSWER mode of your unit is set to off (TEL mode), you
can turn the AUTO ANSWER mode on from a remote location using a touch tone telephone.
AUTO ANSWER mode:
— FAX ONLY mode
— TEL/FAX mode
— TAD/FAX mode (KX-FP185 only)
■
For KX-FP181
1. Call your unit and wait for 10 rings.
●
You will hear a beep signal.
2. — To switch to the FAX ONLY mode:
Press
within 8 seconds.
— To switch to the TEL/FAX mode:
Press
within 8 seconds.
3. Hang up the handset.
Note:
●
Press
or
within 8 seconds after hearing the beep, otherwise the call will be interrupted and the
unit will remain in the TEL mode.
■
For KX-FP185
1. Call your unit and wait for 10 rings.
●
You will hear a beep signal.
2. Enter the remote operation ID (feature #11 on page 66) within 8 seconds.
●
You will hear a beep signal.
3. — To switch to the FAX ONLY mode:
Press
within 3 seconds.
— To switch to the TEL/FAX mode:
Press
within 3 seconds.
— To switch to the TAD/FAX mode:
Wait for 3 seconds, then the greeting message will be played.
4. Hang up the handset.
Note:
●
Enter the remote operation ID within 8 seconds after hearing the beep, otherwise the call will be
interrupted and the unit will remain in the TEL mode.
Turning the AUTO ANSWER mode on remotely
!!