9. Programmable Features
60
9.8 Network features (KX-FLM673, LAN connection only)
These features can be programmed only by through the web browser interface.
Note:
L
See the following sections for details on these related features:
–
Change password (feature #155 on page 51)
–
DHCP mode (feature #500 on page 58)
–
IP address (feature #501 on page 58)
–
Subnet mask (feature #502 on page 58)
–
Default gateway (feature #503 on page 58)
–
DNS server #1 (feature #504 on page 58)
–
DNS server #2 (feature #505 on page 58)
–
Machine name (feature #507 on page 58)
–
IP filtering (feature #532 on page 58)
–
Auto IP (feature #533 on page 58)
–
HTTPD (feature #534 on page 59)
Feature
Tab
Selection
Setting the location
where you use this unit
[
LAN FEATURE
]
Enter the location information of the unit.
SMTP setting for scan to
e-mail (via e-mail
server)
[
E-MAIL FEATURE
]
Enter the SMTP server information to send scanned
image from the unit via e-mail server. Consult your
service provider or network administrator for details.
Setting the error notify
feature
[
ERROR NOTIFY
]
[
ENABLED
]
: The unit will send an e-mail to registered
destinations when the printing problem occurs.
[
DISABLED
]
(default): Deactivates this feature.
SMTP setting for error
notify feature
[
ERROR NOTIFY
]
Enter the SMTP server information to send an error
notify e-mail.
Registering
destinations for error
notify feature
[
ERROR NOTIFY
]
Enter the e-mail address to which error notify will be
sent, and select the type of problems.
Содержание KX-FLM663HX
Страница 92: ...PNQX1315ZA CM0408CK0 ...