Panasonic KX-FLB882CX, Руководство по эксплуатации

Страница: 59 / 108

9. Programmable Features
59
Sending a fax at a specific
time
{#}{
4
}{
1
}{
2
}
This feature allows you to take advantage of low-cost calling hours offered by
your telephone company. This feature can be set up to 24 hours in advance of
the desired time.
{
0
}
“
OFF
” (default)
{
1
}
“
ON
”
To send a document:
1. If the
{
FAX
}
light is OFF, turn it ON by pressing
{
FAX
}
.
2. Set the original (page 19).
3. If necessary, change to the desired resolution (page 39) and the desired
contrast (page 39).
4.
{
MENU
}
i
{#}{
4
}{
1
}{
2
}
5. Press
{
1
}
to select “
ON
” .
i
{
SET
}
6. Enter the fax number.
L
To enter an item using one-touch dial feature and navigator directory,
see step 3 on “6.3.1 Using the scanner glass”, page 41. (When using
navigator directory, you do not have to press
{
DIRECTORY
}
before
pressing
{V}
or
{^}
.)
7.
{
SET
}
8. Enter the transmission start time.
L
If you selected 12-hour time entry (page 21), press
{*}
repeatedly to
select AM or PM.
L
If you selected 24-hour time entry (page 21), the time is set using 24-
hour time entry.
9. When using the scanner glass, press
{
SET
}
.
i
{
START
}
When using the auto document feeder, press
{
SET
}
.
L
The document will be fed into the unit and scanned into memory. The
unit will then send the data at the specified time.
Note:
L
To cancel after programming, press
{
STOP
}
while the unit is idle, and then
press
{
SET
}
.
Setting the Error Correction
Mode (ECM)
{#}{
4
}{
1
}{
3
}
This feature is available when the sending / receiving fax machines are ECM
compatible.
{
0
}
“
OFF
” : Deactivates this feature.
{
1
}
“
ON
” (default): If there is an error during fax transmission / reception, the
unit will support the communication.
Setting the connecting tone
{#}{
4
}{
1
}{
6
}
If you often have trouble when sending faxes, this feature allows you to hear
connecting tones: fax tone, ring back tone and busy tone. You can use these
tones to confirm the status of the other party’s machine.
{
0
}
“
OFF
” : Deactivates this feature.
{
1
}
“
ON
” (default): You will hear connecting tones.
Note:
L
If the ring back tone continues, the other party’s machine may not be a fax
machine or may have run out of paper. Check with the other party.
L
The connecting tone volume cannot be adjusted.
Activating the Distinctive
Ring feature
{#}{ 4 }{ 3 }{ 0 }
{
0
}
“
OFF
” (default)
{
1
}
“
ON
”
Note:
L
This feature may not be available depending on feature #114 setting (page
3).
L
See page 53 for details.
Feature/Code Selection
FLB882CX-PFQX2773ZB-OI-en.book Page 59 Friday, October 5, 2007 11:45 AM