Panasonic KX-FL403EX Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 74

Panasonic KX-FL403EX Скачать руководство пользователя страница 51

7. Help

49

Troubleshooting

7.3 When a function does not work, check here

7.3.1 Initial settings

7.3.2 General

Problem

Cause & Solution

I cannot hear a dial tone.

L

The telephone line cord is connected to the

[

EXT

]

jack on the unit. Connect

to the

[

LINE

]

jack (page 15).

L

If you use a splitter/coupler to connect the unit, remove the splitter/coupler
and connect the unit to the wall jack directly. If the unit operates properly,
check the splitter/coupler.

L

Disconnect the unit from the telephone line and connect a known working
telephone. If the working telephone operates properly, contact our service
personnel to have the unit repaired. If the working telephone does not
operate properly, contact your telephone company.

L

The power cord or telephone line cord is not connected. Check the
connections.

L

If you connected the fax machine through a computer modem, connect the
fax machine directly to a telephone line jack.

I cannot make calls.

L

The dialling mode setting may be wrong. Change the setting (feature #13 on
page 16).

The unit does not ring.

L

The ringer volume is turned OFF. Adjust it (page 17).

Problem

Cause & Solution

The other party complains
they only hear a fax tone and
cannot talk.

L

FAX ONLY mode is set. Tell the other party the number is only used for
faxes.

L

Change to TEL mode (page 33) or TEL/FAX mode (page 34).

The

{

REDIAL/PAUSE

}

button

does not function properly.

L

If this button is pressed during dialling, a pause will be inserted. If pressed
immediately after a dial tone is obtained, the last number dialled will be
redialled.

During programming, I
cannot enter the code or ID
number.

L

All or part of the number is the same. Change the number: feature #41
(page 42) and #49 (page 43).

The unit beeps.

L

The memory reception alert of feature #44 is ON (page 42), and the unit has
a document in memory. Press

{

STOP

}

to stop the beeps, then see the

displayed message instructions to solve the problem.

The recording paper does not
stack properly on the paper
stacker.

L

High humidity may cause the recording paper to curl. Try turning the paper
over and re-inserting it. If the curl on the paper is heavy, please remove it
from the paper stacker. If you still have this problem, contact our service
personnel.

FL403EX-PFQX2606ZA-en.book Page 49 Friday, July 28, 2006 10:26 AM

«
...
49
50
51
52
53
...
»

Содержание KX-FL403EX











































































Отзывы:

Нет отзывов