6
Installations and connections
When the unit runs out of the ink film, the following message will be displayed.
インクフィルムの交換が必要です U23
販売店にてお買い求めください
(インクフィルム品番 :KX-FAN190)
Install a new ink film.
Installing the ink film
Replacement ink film:
KX-FAN190 (15 m)
¥
714
KX-FAN190W (15 m x 2)
¥
1,208
KX-FAN191 (15 m)*
1
¥
893
KX-FAN191W (15 m x 2)*
1
¥
1,523
・
As of November 2012
・
Tax included
*1 KX-FAN191/KX-FAN191W leaves a fainter print trail on the film
than KX-FAN190/KX-FAN190W does.
3
Insert the ink film.
Do not place the ink film on the back side of
the control panel. Any ink adhering to the glass
or flat white surface may cause black or white
lines to appear on the recording paper or the
recipient’s fax.
Insert the orange
gear into the left slot
of the main unit.
Insert the white gear into the right slot
of the main unit.
4
If the ink film is slack, tighten it by
winding this gear (orange).
Flat white surface
Glass
2
Pull up the green lever
and open the back cover.
1
Open the control panel.
5
Close the back cover pressing
“ ” down on both sides
until it clicks into place.
6
Close the control panel.
KX-PD702DL_DW_QRG.indd 6
2012/11/13 13:00:38