Panasonic KX-FC235E страница 90 Скачать руководство пользователя

Страница: 90 / 114

11. Help

11 Help

Error Messages

11.1 Error messages –
Reports

If a problem occurs during fax transmission or
reception, one of the following messages will be
printed on the sending and journal reports (page
50).

COMMUNICATION ERROR
(Code: 40-42, 46-72, FF)

A transmission or reception error occurred.
Try again or check with the other party.

COMMUNICATION ERROR
(Code: 43, 44)

A line problem occurred. Connect the
telephone line cord to a different socket and
try again.

An overseas transmission error occurred. Try
using the overseas mode (feature #23 on
page 69).

DOCUMENT JAMMED

The document is jammed. Remove the
jammed document (page 101).

ERROR-NOT YOUR UNIT
(Code: 54, 59, 70)

A transmission or reception error occurred
because of a problem with the other party’s
fax machine. Check with the other party.

JUNK FAX PROH. REJECT

The fax was rejected by the junk fax
prohibitor feature (page 59).

MEMORY FULL

The memory is full of received documents
due to a lack of recording paper, a lack of ink
film or a recording paper jam. Install paper
(page 19), install ink film (page 16) or clear
the jammed paper (page 98).

NO DOCUMENT

The document was not fed into the unit
properly. Re-insert it and try again.

OTHER FAX NOT RESPONDING

The other party’s fax machine is busy or has
run out of recording paper. Try again.

The other party’s fax machine rings too many
times. Send the fax manually (page 49).

The other party’s machine is not a fax
machine. Check with the other party.

The number you dialled is not in service.

PRESSED THE STOP KEY

L {

STOP

}

was pressed, and fax transmission

or reception was cancelled.

Fax transmission or reception was
successful.

FC235E-PFQX2180YA_en.book Page 88 Monday, June 27, 2005 11:54 AM

Содержание KX-FC235E



















































































































Результаты поиска

Содержание KX-FC235E

Отзывы:

Похожие инструкции для KX-FC235E

Бренды по названию

Популярные бренды

Panasonic KX-FC235E, Руководство по эксплуатации

Результаты поиска

Содержание KX-FC235E

Отзывы:

Похожие инструкции для KX-FC235E

Бренды по названию

Популярные бренды