4 Appendix
4.1 Appendix
This section describes about mounting the repeater on a wall and its specifications.
4.2 Wall Mounting
Mounting
CAUTION
• Make sure the cable is securely fastened to the wall.
1.
Place the reference for wall mounting on the wall to mark the 2 screw positions.
2.
Install the 2 screws and washers (included) into the wall.
Note
• Make sure that the screw heads are at the same distance from the wall.
• Install the screws perpendicular to the wall.
3.
Hook the repeater on the screw heads.
*1
*2
*1
Washer
*2
Drive the screw to this point.
4 Appendix
25
