How to Pair a Panasonic KX-A406 to the Panasonic Base Unit
Objective
Pairing a Panasonic KX-A406 to a Panasonic KX-TGP600 base unit.
Applies To
• Panasonic KX-A406 & KX-TGP600
Procedure
Enable repeater mode
1. Find a handset registered to the Panasonic KX-TGP600 Base unit.
2. Press the
menu
key (middle key).
3. Go to
System Settings
.
4. Go to
Repeater Mode
.
5. Select
On
.
After Repeater Mode has been enabled on the Panasonic KX-TGP600 base unit, you can register the Panasonic KX-
A406 repeater to the base unit. Follow the instructions below to do this.
1. Disconnect the
AC adapter
from the repeater, if it is not already.
2. Press and hold the
handset locator button
on the base unit until the status indicator light flashes
red
,
3. Then
release
the handset locator button.
4. Connect the
AC adapter
to the repeater.
5. When the status light on the repeater
flashes red
, press and hold the program button on the back of the repeater
until the
status light
and the
RSSI/ID light
turns
solid green
.
6. If the status light on the base unit is still
flashing red
, press the
handset locator
button
once
until the status light
is
solid green
.
7. The repeater is now ready for use.
Updated: Wed, 19 Feb 2020 23:59:36 GMT
Powered by
1
