Panasonic KW4M, Руководство пользователя

Страница: 11 / 47

5
3-2 Current
・
Press <A>key to display the current value of the load.
・
Press <A>key to change L1(CT1)-phase current to L2(CT2)-phase current
*Displayed data is updated at every 1 second.
L1(CT1)-phase current (A)
→
L2(CT2)-phase current (A)
Sample of L1(CT1)-phase 30.0A Sample of L2(CT2)-phase 30.1A
・
When input current exceeds 150%F.S. at each range,
「－ － － － － －」
will be displayed in
the lower line.
・
Current measurement parts
Eco-POWER METER measures the current as below.
Display
System
L1(CT1)A L2(CT2)A
Single-phase two-wire 1(L1)-phase current -
Single-phase three-wire 1(R)-phase current 3(T)-phase current
Three-phase three-wire 1(R)-phase current 3(T)-phase current
3-3 Voltage
・
Press <V>key to display the voltage value of the load.
・
Press <V>key to change voltage between 1 and 2(V) to 2 and 3(V).
*Displayed data is updated at every 1 second.
Voltage between 1 and 2(V)
→
Voltage between 2 and 3(V)
Sample display of 238.8V Sample display of 238.6V
・
When input voltage exceeds 150%F.S. at each range,
「－ － － － － －」
will be displayed in
the lower line.
・
Voltage measurement parts
Eco-POWER METER measures the voltage as below.
Display
System
L1V L2V
Single-phase two-wire
Voltage between 1 and 2
（
R-phase
）
－
Single-phase three-wire
Voltage between 1 and 2
（
R-phase
）
Voltage between 2 and 3
(T-phase)
Three-phase three-wire
Voltage between 1 and 2
（
Between R and S line
）
Voltage between 2 and 3
(Between S and T line)
<A>
<V>
< A > < A >
< V > < V >