70
Select the pattern files by pressing the [Binary/Gray], [Red], [Blue] or [Green]
button. In the case of Color, the pattern files must be set for Red, Blue and
Green.
How to create the gamma pattern files
•
Gamma pattern files are created using a text editor (such as Notepad which is
provided with Windows
®
).
•
Give a name to the pattern, and save it as a file. The filename will have the .PXG
extension. Both upper- and lower-case letters are effective for the names.
Normal:
This is the recommended setting when scanning in color, grayscale
or halftone mode.
• With the KV-S7065C, this is the most suitable setting when scan-
ning business documents. Select CRT when scanning the kind of
document most of whose pages consist of photos.
CRT:
This is the recommended setting if the primary objective of
scanning documents is to view them on the display.
Linear:
This is the mode that gamma correction is not used.
Line 1
Name; the scanner ignores this line.
Line 2
Table size; input “256”.
Line 3
Input the conversion value of level 0 (brightest level).
Line 4
Input the conversion value of level 1.
:
:
Line 258
Input the conversion value of level 255 (darkest level).
For the data to be set, “0” is the brightest settings and “255” is the darkest setting.
Содержание KV-SS905C
