6.2.1.3 Carrier sheet
You can use an optional carrier sheet (KV-SS076) to scan incompatible documents like very thin paper,
curled or wrinkled documents, photographs, bound documents etc. When using carrier sheet, please note
following conditions for the documents.
Document size:
Width:
150 mm (5.91 in.) or less
Length:
200 mm (7.87 in.) or less
Thickness:
2.6 mm (0.1 in.) or less (including carrier sheet)
How to insert the document in a carrier sheet
The corner of the document should be adjusted to match the corner of the carrier sheet.
Make sure the documents do not protrude from the carrier sheet.
When scanning the bound documents, put the thinner part (the opened half with less page) in the carrier
sheet first, as shown in the illustration.
Note
•
When using a carrier sheet, please refer to "6.2.2.1 When using the carrier sheet" (page 33).
•
When scanning the documents with the carrier sheet, the image processing function may not work
properly. Scan beforehand to confirm the scanned image.
6.2.1 About documents for the ADF
25
