10.2.3 Cleaning the Scanning Backgrounds
1.
Enter cleaning mode (page 100), and wipe off any dirt on the scanning backgrounds ( ) with a soft and
dry cloth.
•
In cleaning mode, the scanning background rollers ( ) rotate a small amount each time the Start/
Stop button (
) on the unit is pressed. Therefore, you do not need to rotate the rollers with your
finger.
•
Wipe off dirt from all areas on the scanning background rollers: the white reference area ( ), black
background area ( ), and white background area ( ).
1
1
2
3
4
Notice
•
If dirt is difficult to remove, wipe off dirt with roller cleaning paper (page 13), and then wipe the
scanning backgrounds dry with a soft cloth.
Note
•
Dirt on the white reference area ( ) may affect the quality of scanned images. Dirt on the black
background area ( ) or the white background area ( ) may affect the performance of the
"Automatic Crop" function.
10.2.3 Cleaning the Scanning Backgrounds
97