34
Turning off “Preset enable,” will deactivate the controls for “Source B” in the “Parameter View” panel
and disable the “Preset”-bus control, located at the bottom of the page.
Note:
Also, meanwhile created A/B transitions will be affected by turning off “Preset enable.”
3.3.3.3 Tools in Working Area
Use the toolbox located under the
working area for quick access to the
“Select,” “Crop,” “Transform,” and
“Corner Pinning” tools. Once
selected, they can be controlled
using the mouse and wheel controls
in the working area. Additionally, all
tools can also be enabled and modified in the “Parameter View” panel as described in the following
examples. “Path Linear” and “Path Animation” can be used once selected (and enabled) via the button
in the lower right corner
.
Picture 3.3.1.3.16
Picture 3.3.1.3.19
Picture 3.3.1.3.18
Picture 3.3.1.3.20
A list of default
effects for instant
use per Layer
(picture 3.3.1.3.17).
For more effects,
use the button
located in
the lower right
corner of the
“Scenes”
menu.
Selecting more
effects from the list
(picture 3.3.1.3.19)
will add them to the
default effects list
(picture 3.3.1.3.18).
The new added
effects will be
disabled from the
main selection list
(picture 3.3.1.3.20).
Note:
ChromaKey and LuminanceKey effects can be added multiple times to the default effects list. In
total, the ChromaKey and LuminanceKey effect can be used 4 times per Layer each.
Picture 3.3.3.3.1
4
Picture 3.3.1.3.17
