1
1
Hardware Installation and Connection
Note: All the installation and operations here should conform to your local
electric safety rules.
1.1
Check Unpacked NVR
When you receive the NVR from the forwarding agent, please check whether there is any visible
damage. The protective materials used for the package of the NVR can protect most accidental
clashes during transportation. Then you can open the box to check the accessories.
Please check the items in accordance with the list (Remote control is optional). Finally you can
remove the protective film of the NVR.
1.2
About Front Panel and Rear Panel
For detailed information of the function keys in the front panel and the ports in the rear panel,
please refer to the
User’s Manual
included in the resource CD.
The model label in the front panel is very important; please check according to your purchase order.
The label in the rear panel is very important too. Usually we need you to represent the serial number
when we provide the service after sales.
1.3
After Remove the Chassis
Please check the data cable, power cable, COM cable and main boar cable connection is secure
or not.
1.4
HDD Installation
Important
：
Please turn off the power before you replace the HDD.
The pictures listed below for reference only
Usually we do not recommend the PC HDD. Please refer to HDD Compatibility Chart provided by dealer
for the information about HDD models.
1. Use the screwdriver to
loose the screws of the rear
panel and then remove the
front cover.
2.
Put the HDD to the HDD bracket
in the chassis and then line up the
four screws to the four holes in the
HDD. Use the screwdriver to fix the
screws firmly to secure HDD on the
HDD bracket
3. Connect to the HDD data cable to
the main board and the HDD port
respectively. Loosen the power
cable of the chassis and connect
another end of the power cable to
the HDD port.
