Panasonic Hybrid IP-PBX, Руководство пользователя

Страница: 28 / 40

4.1 Programming the IP-EXT16 Card
28 Information about IP Proprietary Telephones
4.1 Programming the IP-EXT16 Card
4.1.1 Assigning the IP Addressing Information
When an IP-EXT16 card is placed on the LAN for the first time, it is necessary to assign IP addressing
information to the card. This is done by using the KX-TDA Maintenance Console.
Notes
• It is assumed that you have already installed the KX-TDA Maintenance Console to your PC.
• The contents and design of the software are subject to change without notice.
• Screen shots reprinted with permission from Microsoft Corporation.
1. Start the KX-TDA Maintenance Console from the Start
menu.
2. a.
Type the Installer Level Programmer Code
(
INSTALLER ).
b.
Click OK .
3.
a.
Click Connect
→
RS-232C or USB .
b.
On the next screen, type the system password for
installer (default:
1234 ).
c.
Click OK .
The program menu appears.
4. a.
Double-click Configuration .
b.
Double-click Slot .
c.
Click Status of the IP-EXT16 card.
d.
Set the status to OUS .
e.
Click Card Type of the IP-EXT16 card.
5.
a.
In the IP Address box, type the IP address of the
card
*1
.
b.
In the Subnet Mask box, type the subnet mask
address of the network *2 .
c.
Click OK .
d.
Click Status of the IP-EXT16 card.
e.
Set the status to INS .