Panasonic HYBRID IP-PBX KX-TDA100, Руководство по программированию ПК

Страница: 76 / 854

2.6 Utility
76 PC Programming Manual
2.6.4 Utility—SD Card File View and Load
Displays a list of files on the SD memory card, and allows you to update the programs stored in LPR
cards (cards with local processors) and Cell Stations (CSs).
This option is only available at Installer level.
To update the program stored in an LPR card, the card must first be set to out of service (OUS). To
update the program stored in a CS, the port of the card (CSIF/DHLC/DLC) that the CS is attached to
must be set to OUS, but the card itself must be set to in service (INS). Only cards that are in the
correct status will be displayed.
The name, date and time of creation, and size of files are displayed.
To view and load files on the SD memory card
1.
From the Utility menu, select SD Card File View and Load .
2.
Click on the name of the desired file.
Only files containing program data (whose filenames start with "P") can be selected.
3.
Click Detail .
The Detail screen will be displayed. Header information from the chosen SD memory card file is
displayed on the left.
4.
From the Card drop-down list on the right, select the card(s) whose software you want to update.
• To update a specific card or port:
• LPR cards: select the slot number and card name.
• CSs: select the slot number and card name, and then select the related CS port from
the drop-down list directly below.
• To update all matching cards simultaneously:
• Select "ALL".
5.
Click View to update the displayed header information of the selected files.
The file with the higher File Version and File Revision numbers is newer.
6.
Click Load to update the file stored on the PBX.
When the update is finished, a message will be displayed.
7.
Click OK .
The display will return to the Detail screen.