12
VQT2Z95
1
Open the card/battery door and insert the battery in
the direction shown in the figure.
≥
Push the center of the battery in the direction of the
#
until it
“clicks” and locks.
2
Close the card/battery door.
∫
Removing the battery
Move the battery release lever in the
direction indicated by the arrow and
remove the battery when unlocked.
≥
Turn off the unit and make sure the LCD
monitor is turned off. Then remove the
battery while supporting the unit to prevent
it from dropping.
Inserting/removing the battery
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s
instructions.
HM-TA1_PP-VQT2Z95_mst.book 12 ページ ２０１０年７月１４日 水曜日 午後５時５０分
