Panasonic HG-S Series, Руководство пользователя

Страница: 64 / 200

BASIC OPERATION
© Panasonic Industrial Devices SUNX Co., Ltd. 2019 4-20
4-2-4 Bank Mode
<Overview>
You can save / load the HIGH set value or LOW set value to/from a specified bank (1 to 3).
You can use the bank function to save settings for an object to be measured in a bank, and eas -
ily load the settings when needed.
Save
• Only by key operation.
Load
• By either key operation or external input.
Bank 1
Bank 2
Bank 3
■
Setting Items Saved to and Loaded from Banks
Setting item Factory default state
All setting items –
HIGH set value, LOW set value Default state
HIGH set value, LOW set value, preset value –
<Reference>
● Setting items saved to and loaded from banks can be changed in setting mode.
For the setting procedure, refer to “5-6 Bank Settings” .
● Set values saved to and loaded from banks are saved in internal memory and retained even af-
ter the power is turned OFF.
● The usage count is about 1 million.
■
How to Save and Load Settings to / from a Bank
As shown below, there are two methods for saving and loading settings to / from a bank.
Method Description
Key operation
Save to bank
Load from bank
External input Load from bank