4
VQT2U80 (ENG)
magnetic fields created by speakers or
large motors.
≥
Electromagnetic wave radiation generated
by microprocessors may adversely affect
this unit, disturbing the pictures and/or
sound.
≥
If this unit is adversely affected by
electromagnetic equipment and stops
functioning properly, turn this unit off and
remove the battery or disconnect AC
adaptor. Then reinsert the battery or
reconnect AC adaptor and turn this unit
on.
Do not use this unit near radio
transmitters or high-voltage lines.
≥
If you record near radio transmitters or
high-voltage lines, the recorded pictures
and/or sound may be adversely affected.
About connecting to a PC
≥
Do not use any other USB cables except
the supplied one.
∫
Indemnity about recorded
content
Panasonic does not accept any
responsibility for damages directly or
indirectly due to any type of problems that
result in loss of recording or edited content,
and does not guarantee any content if
recording or editing does not work properly.
Likewise, the above also applies in a case
where any type of repair is made to the unit.
∫
Cards that you can use with
this unit
SD Memory Card, SDHC Memory Card
and SDXC Memory Card
≥
4 GB or more Memory Cards that do not
have the SDHC logo or 48 GB or more
Memory Cards that do not have the SDXC
logo are not based on SD Memory Card
Specifications.
≥
Refer to page 15 for more details on SD
cards.
∫
For the purposes of these
operating instructions
≥
SD Memory Card, SDHC Memory Card
and SDXC Memory Card are referred to
as the “SD card”.
≥
Functions that can be used for motion
picture recording/motion picture playback
are indicated by
in these
operating instructions.
≥
Functions that can be used for still picture
recording (including the still picture
recording in motion picture recording
mode)/still picture playback are indicated
by
in these operating
instructions.
≥
Pages for reference are indicated by an
arrow, for example:
l
00
HDC-SD600EP-VQT2U80_mst.book 4 ページ ２０１０年４月１２日 月曜日 午後２時３２分
