Panasonic HD-PLC DA-PU100, Руководство администратора

Страница: 63 / 67

DA-PU100 Series Administrator's Manual
63
6 Specifications
6.1 Unit
Operating environment
Temperature : -25
℃
– 60
℃
Humidity : 20% RH – 85% RH (No condensation)
Degree of protection from solid
objects IP5X
External dimensions Width x Height x Depth (Approx.):
75 mm x 102 mm x 47 mm (2.95 in. x 4.02 in. x 1.85 in.)
(Unit only. Not including protrusions)
Weight Approx. 260 g (0.57 lb.) (Unit only )
Power requirements AC100 – 240V, 50/60 Hz
Power consumption Avg. 4 W, Max. 7 W (100V)
Avg. 6 W, Max. 8.5 W
（
240V)
Interface PLC port / Ethernet port / PS-485 port / USB port (1ch Each)
Protocols
TCP/IP / DHCPc / HTTPd
：
IPv4/IPv6
SNMP / MIB
：
IPv4
6.2 PLC port
Standard HD-PLC multi-hop
Multi-hop 10
Communication speed 240 Mbps *1
Frequency band 2 MHz – 28 MHz
Modulation method Wavelet OFDM (2 PAM – 32 PAM)
Access method CSMA/CA
Error correction Reed-Solomon encoder/decoder
Convolutional encoder/Viterbi decoder
LDPC-CC (Low Density Parity Check-Convolutional Codes)
Security AES 128-bit encryption
Communication distance Approx. 200 m (656 ft) between PLC adaptors *2
Number of terminal adaptors Max. 1,024 units per 1 Master adaptor *3
*1
．
The indicated value is the theoretical maximum. Actual speeds will be less than this value.
*2
．
This value may differ based on the operating environment.
*3
．
The maximum number of terminal adaptors may vary depending on the operating environment.