Adjustable settings when shooting – Area mode function
161
Area mode function
Touch the subject to apply various effects tailored to the subject that is touched.
•
Area auto focus function
Adjusts the focus automatically tailored to the subject that is touched.
•
Area auto iris level function
Adjusts the iris automatically tailored to the subject that is touched.
•
Area brightness display
Displays the luminance level of the subject that is touched.
Operation function settings
Sets the operation to be assigned to the area mode function from the [CAMERA] menu.
1
Select the desired function in the [CAMERA] menu
¨
[SW MODE]
¨
[AREA MODE].
[INHIBIT]:
Does not assign a function.
[FOCUS]:
Sets the area auto focus function
[IRIS]:
Area auto iris function
[Y GET]:
Area brightness display
[FOCUS/IRIS]:
Simultaneous operation of the area auto focus function and area auto iris function
[FOCUS/Y GET]:
Simultaneous operation of the area auto focus function and area brightness display
Operation of area mode function
The function set in the [CAMERA] menu
¨
[SW MODE]
¨
[AREA MODE] can be used by performing the following operation
when shooting or while in shooting standby.
1
Either press the USER button assigned to [AREA] or touch the USER button icon.
(
Assigning functions to the USER buttons: 65
)
•
[AREA] is set in the <USER1> button at the time of purchase.
•
The area frame (A) is displayed, and the
is displayed on the right side of the screen.
•
When the area brightness display is activated, the brightness display in the center does not operate.
2
Touch the shooting screen.
•
The area frame is displayed in the area that is touched to apply the effects set in the menu.
3
Press the USER button or touch the USER button icon
*
again.
•
The area frame disappears and the unit exits the area mode function.
* To display the USER button icon, touch and hold the screen.
(A)