- 122 -
∫
To save a manually-edited scene
You can save manually edited scenes as a single scene.
(For the
/
/
)
The recorded scenes can be saved in the SD card.
(For the
/
)
The recorded scenes can be saved in the built-in memory.
1
Stop the playback of a manually-edited scene or wait until the playback is
finished.
2
Touch [SAVE].
3
Select the format to save.
(When [AVCHD 1920
k
1080/50i] is selected)
≥
Scenes recorded in 1080/50p are converted to 1080/50i (picture quality [HA] of [REC MODE])
and saved.
≥
Scenes recorded in 1080/50i are recorded in [HA] regardless of [REC MODE] ([PH]/[HA]/[HG]/
[HE]) of a scene.
4
Touch [YES].
≥
If you are using the battery, a message recommending that you use the AC adaptor will be
displayed. To start the saving operation, touch [START].
5
(For the
/
/
)
Touch [EXIT].
(For the
/
)
Touch [COPY] or [EXIT].
≥
Scenes saved in the built-in memory can be copied to the SD card. To copy to the SD card,
select [COPY].
≥
Operate according to the message and touch [EXIT] at the end.
≥
You can save scenes even when using the battery, but we recommend that you use the AC
adaptor.
≥
Manually-edited scenes recorded as Backup for Twin Camera will be saved as normal AVCHD or
MP4 scenes.
≥
For information on the approximate free space requirements for saving a manually edited scene,
refer to page
[AVCHD 1920
k
1080/50i]:
It will be saved in high-definition image quality.
[MP4 1280
k
720/25p]:
It will be saved with an image quality, allowing you to upload it on
the Internet in higher image quality. The format supports playback
on a PC.
[MP4 640
k
360/25p]:
It will be saved with an image quality, allowing you to upload it on
the Internet faster. The format supports playback on a PC.
WXF990 VXF990
VX980
WXF990M
VX980M
WXF990 VXF990
VX980
WXF990M
VX980M