- 207 -
∫
To disconnect USB cable safely
Select the
icon in task tray displayed on the PC, and then select the model number of
this unit to disconnect the USB cable.
≥
Depending on your PC’s settings, this icon may not be displayed.
∫
Charging the battery by connecting it to different devices
When using the battery, if you turn off the unit and connect it to a PC, Panasonic Blu-ray disc
recorder or Panasonic DVD recorder, the battery will charge.
≥
When connecting this unit to a PC for the first time, make sure to connect this unit to the
PC with this unit turned on.
≥
Insert the USB cable securely all the way. It will not operate properly if it is not inserted all the
way.
≥
Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
≥
You cannot charge the battery by connecting the supplied DC cable.
≥
Be sure to connect the unit directly to the PC, Blu-ray disc recorder or DVD recorder.
≥
During charging, the status indicator flashes.
≥
You cannot charge when the status indicator flashes rapidly, or when it does not light at all.
Charge using the AC adaptor. (
)
≥
It will take 2 or 3 times longer to charge compared to when using the AC adaptor.
≥
If the status indicator flashes at a particularly fast or slow rate, refer to page
About the screen indication of the unit
≥
Do not disconnect the USB cable, battery, or AC adaptor while the access lamp is on or card
access icon (
) appears on the unit screen.
≥
If the screen does not change when the unit is operated while connected to a PC, disconnect
the battery and/or AC adaptor, wait approximately 1 minute, reconnect the battery and/or AC
adaptor, wait approximately 1 minute again, and then turn the unit back on. (Data may be
destroyed when above operation is performed while accessing the SD card.)