- 75 -
≥
Register <LEVEL GAUGE> to a USER button. (
This function displays the horizontal/vertical tilt of the unit with the electronic level.
∫
To correct the tilt
≥
The horizontal tilt display
A
and vertical tilt display
B
appear yellow when there is a tilt, and
appear green when there is almost no tilt.
≥
The maximum tilt display angles are approximately 45
o
in horizontal direction and 10
o
in vertical
direction.
≥
The electronic level does not affect the actual recorded images.
≥
This function is not available in the following cases:
j
During Freeze Frame (
j
When color bars are displayed. (
≥
If [SELF SHOOT] (
) is set to [MIRROR], the electronic level will not be displayed when you
record yourself.
≥
Even when the tilt is in the corrected state, an error of approximately 1
o
may occur.
≥
In the following cases, the electronic level may not be displayed correctly:
j
When moving this unit
j
When pointing this unit up or down at an angle closer to perpendicular
≥
Register <LEVEL SHOT> to a USER button. (
This function detects the horizontal tilt of the unit, and automatically corrects it to the level position.
≥
is displayed on the screen.
≥
The icon changes when the tilt exceeds the correction range.
≥
When the tilt exceeds the correction range, move the unit to the position where
is displayed.
≥
This function is not available in the following cases:
j
During Super Slow Recording (
)
≥
The setting of this function cannot be changed during Freeze Frame. (
≥
[LEVEL GAUGE] turns off if you set [LEVEL SHOT] to [ON]. Conversely, [LEVEL SHOT] turns off
if you set [LEVEL GAUGE] to [ON].
≥
The range that this icon can be displayed correctly the slope is about 45
o
to the horizontal
direction.
<LEVEL GAUGE>
(Horizontal direction)
(Vertical direction)
When correcting the leftward tilt
When correcting the downward tilt
<LEVEL SHOT>
When the tilt is corrected
/
When the tilt is above the correction range
