- 65 -
≥
This unit will adjust the time code in accordance with the frame rate of the [REC FORMAT]
(
). Therefore, it may not be continuous from the previous final time code when the
recording format is changed.
≥
If the frame rate in [REC FORMAT] is set to 23.98p, set the number of frames to [00] or a multiple
of 4. If you enter a different value, time code will not be recorded correctly.
Setting the Recording Counter
Recording Counter will display the recording time in seconds.
0:00:00 (hour : minute : second (When [REC COUNTER] is set to [TOTAL]))
SCN 0:00:00 (hour : minute : second (When [REC COUNTER] is set to [SCENE]))
Select the counting method during the recording.
Select the menu.
To reset the Recording Counter for the Recording
Mode
The Recording Counter will be set to 0:00:00 when
is
touched while displaying the counter.
[REC COUNTER]
: [DISP SETUP]
#
[REC COUNTER]
#
desired setting
[TOTAL]:
The count continues to increase until the Recording Counter is reset.
[SCENE]:
Resets the Recording Counter at start of recording. Counts the time
of each recording session.
MENU
RESET
COUNT
DISP/
MODE
O.I.S.
BARS ZEBRA
RESET
