- 152 -
∫
If AVCHD scenes do not change smoothly when played back on
another device
The images may be still for several seconds at the joins between the scenes if the following
operations are performed when multiple scenes have been continuously played back using another
device.
≥
Just how smoothly the scenes will be played back depends on the playback device. Depending
on the device used, the images may stop moving and become still for a moment even when none
of the following conditions are applicable.
≥
A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at every
4 GB of data when played back with another device.
About recovery
If faulty management information is found, the messages may appear and a repair is performed.
(Repairing may take time depending on the error.)
≥
is displayed when abnormal management information is detected when the scenes are
displayed in thumbnail.
≥
Use a sufficiently charged battery or the AC adaptor.
≥
Depending on the condition of the data, it may not be possible to completely repair the data.
≥
If recovery fails, it will not be possible to play back scenes recorded before the unit turned off.
≥
When data recorded on another device is recovered, it may not be possible to play back the data
on this unit or the other device.
≥
If recovery fails, turn the unit off and on again after waiting awhile. If recovery fails repeatedly,
format a media on the unit. Please be aware that if a media is formatted, then all the data
recorded on the media will be erased.
≥
If the thumbnail information is recovered, displaying the thumbnails may become slower.
Others
Problem
Check points
If the SD card is inserted in
this unit, it is not
recognized.
≥
If the SD card is formatted on a PC, it may not be recognized
by this unit. Use this unit to format SD cards. (
Principal reasons for not playing back smoothly
≥
The recording format [PS] was switched to another recording format when a scene was
recorded
≥
When the scenes were recorded on different dates
≥
When scenes lasting under 3 seconds have been recorded
≥
When PRE-REC was used for recording
≥
When the Interval Recording is used
≥
When deleting scenes
≥
When scenes recorded more than 99 scenes on the same date
