manualshive.com logo in svg

Panasonic GM1 Series, Руководство пользователя

Поделиться
Скачать
Panasonic GM1 Series Скачать руководство пользователя страница 592

14.2 Time Function

14.2.1 Overview of Time Function

This section explains the time function that uses date and time settings in GM Programmer and

function blocks.

14.2.2 Settings Based on GM Programmer

Date and time settings and monitoring for the GM1 controller can be performed using the "Date

and Time Settings" window of GM Programmer. Connect to the GM1 controller and select the

"Date and Time Settings" tab of the "Device" window.

Date and Time Settings pane

The "Device Date and Time" frame on the left side of the pane displays the date / time

information of the GM1 controller. To set date and time, enter date and time in the "Date and

Time" frame on the right side of the pane and click the [Update] button. The entered date and

time will be set in the GM1 controller.
If the "Get date / time from PC" check box is selected, the date/time information of the PC will

be automatically set in the GM1 controller. In this case, the time zone of the PC will be

automatically set in the GM1 controller.

14.2.3 Settings Based on Function Blocks

For details on how to use this function, refer to the 

GM1 Series Reference Manual (Instruction)

.

14.2 Time Function

14-10

WUME-GM1RTXOP-01

Содержание GM1 Series











































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды