403
Operations, Administration & Management
13.1 sFlow 13.1.1 sFlow Settings
13
sFlow
13.1
sFlow
13.1.1
sFlow Settings
Use the following window to display the definition of a sFlow collector.
Click
sFlow
to display the following window.
Figure 13-1 sFlow Settings
You can configure the following parameters.
Parameter
Overview
Collector IP Status
This parameter displays if the host IPv4 address (which
is used as the sFlow collector) is valid or invalid.
Collector IP
This parameter displays the host IPv4 address, which is
used as the sFlow collector.
Collector UDP Port
This parameter displays the port-number of sFlow
messages.
If not specified, the port-number is set to
6,343
,
as the default configuration. The range is from 1
to 65,535.
Sampler Rate Status
This parameter displays if the settings on the sampler
rate is enabled or disabled.
Sampler Rate
This parameter displays the frequency of performing a
sampling: the number of frames needed for the sFlow
sampler rate. The sFlow sampler rate is calculated by 1/
rate. The range is from 1,024 to 65,536.
Содержание GA-ML Series
