5
● Unplug the power cord if the STATUS LED flashes in orange. This
shows failure.
Leaving failed equipment connected for a long time could lead to fire.
● Handle the Switching Hub carefully so that fingers or hands may
not be damaged by the twisted pair port or power cord hook block.
● To connect a power receiving equipment supporting IEEE802.3at
to this Switching Hub, use a cable rated Cat5e or higher.
Using other cables may result in heat generation, ignition, and/or
equipment failure.
● When installing this Switching Hub on a wall, use the separately
sold mounting bracket PN71053 (wall-mount bracket). Securely
mount and install the Switching Hub so it would not fall under its
own weight or the weight of connection cables.
The Switching Hub may fall causing injury and/or equipment failure.
● Up to two Switching Hubs can be connected side by side. For this,
use the connecting brackets and screws (for attaching the connect
-
ing bracket) included in the separately sold mounting bracket
PN71052 (for 19-inch rack mount, for two Switching Hubs).
Securely attach the connecting brackets to the connecting screw
holes on the front and back panels, and then install the Switching
Hubs.
If the Switching Hubs are not securely fixed, they may fall causing
injury and/or equipment failure.
● Perform maintenance at periodic intervals to maintain perfor
-
mance.
Assign an administrator for this product and make sure to perform
periodic maintenance. Refer to Panasonic Eco Solutions Network's
web site for the inspection table that lists all required items to be
checked during maintenance.
● When designing a system using this Switching Hub, place appropri
-
ate measures such as setting it up in a redundant configuration.
Communication failure may occur due to failure and/or malfunction
of the equipment during use.
ヤモヶヵリヰワ
