Shoulder Case (FZ-VNSS11)
Handling and maintenance
•
Take care as there is a risk of the unit dropping when the hand strap is loose.
•
Do not use the shoulder case if it is worn out or damaged.
•
Your hand may appear in the shooting range of the camera depending on the way you hold the shoulder
case. When shooting with the camera, adjust the position of the shoulder case so that the shoulder case
does not enter the shooting range of the camera.
•
For typical cleaning, wipe the shoulder case with a soft, dry cloth.
–
If the shoulder case becomes dirty, wet a soft cloth with water and wring it thoroughly before wiping
the shoulder case.
–
Do not clean the shoulder case with benzene, thinner, alcohol, household cleansers, etc., as these
may damage the shoulder case.
Included accessories
•
Shoulder strap
´
1
Description of parts
A
Hand strap
B
Pen holder
C
Rings
You can attach the shoulder strap.
Attaching
1.
Remove the cover and the belt on the hand strap part of the shoulder case (
AB
), and then pull out
the belt (
C
).
2.
Open the flap (
D
), insert the unit into the case from the top in the direction illustrated below with the
screen facing down (
E
), and then close the flap (
F
).
•
Insert the unit all the way in securely.
58
Operating Instructions - Reference Manual
Supplementary items
