Panasonic FZ-G1 Series Скачать руководство пользователя страница 137

Страница: 137 / 145

*30: The specifications may differ depending on the model.

A nanoSIM card (8.8 mm {0.35”} × 12.3 mm {0.48”}) must be inserted in the nanoSIM card slot.

*31: Operation has been tested and confirmed using Panasonic microSD/microSDHC/microSDXC Memory Cards with a capacity of up to 64 GB.

Operation on other microSD equipment is not guaranteed.

*32: To connect the serial device, the serial conversion cable (included) is necessary.

*33: Exclusively configurable by selecting one from Wireless WAN (with GPS) and GPS.

The model number is described on the computer

Check according to the procedure below.

Turn over the computer.

Make sure no foreign objects are under the computer.

Remove the battery pack.

Slide the latch (A).

Remove the battery pack (B).

Check the model number. The model number (C) starting with “FZ-G1” is described.

137

Содержание FZ-G1 Series


















































































































































Результаты поиска

Содержание FZ-G1 Series

Отзывы:

Похожие инструкции для FZ-G1 Series

Бренды по названию

Популярные бренды

Panasonic FZ-G1 Series, Инструкция по эксплуатации - Справочное руководство

Результаты поиска

Содержание FZ-G1 Series

Отзывы:

Похожие инструкции для FZ-G1 Series

Бренды по названию

Популярные бренды