Panasonic FP7 Series, Дополнительные функции руководства

Страница: 9 / 45

2.2 TM16 (16-bit Timer)
2-3
2.2 TM16 (16-bit Timer)

Instruction format
TM16X
5
U30
n S
R0
T5 Y111

Operation unit (i)
There is no operation unit.

List of operands
Operand Description
n Timer number (Settalbe range: 0 to 4095 *For the default memory configuration)
S Timer setting value (Settable range: U0 to U65535)

Available devices (
●
: Available)
Operand
16-bit device 32-bit device Integer
Real
number
String
Index
modifier
*1
WX WY WR WL WS SD DT LD UM WI WO
TS
CS
TE
CE
IX K U H SF DF " "
n
● ●
S
● ● ● ● ● ● ● ●
*1
：
Only 16-bit deivces, 32-bit devices, and integer constants can be modified. (Real number constants and character
constants cannot be specified.)

Outline of operation

This instruction is different from TIM instruction. The range settable by the setting value [S] is
U0 to U65535.

The timer is a non-hold type that is reset when the power supply is turned off or the RUN
mode is switched to the PROG. mode.

When the execution condition is ON, subtraction is carried out for the specified time [S], and
when the elapsed value reaches U0, the timer contact [Tn] (n is a timer contact number)
turns ON.

When the execution condition turns OFF during the subtraction operation, the elapsed value
is reset (cleared to zero).

It is also possible to describe OT instruction right after the timer coil.