Panasonic FP2 ET-LAN, Техническое руководство

Страница: 170 / 306

11-2
11.1 Outline of E-mail Function
ET-LAN unit supports three types of e-mail functions: “Error Notice Mail,” “Report Mail,” and “Device
Watch Mail.” The fixed interval function that the ET-LAN unit checks received e-mails in the mail server
can also be specified. These e-mail functions can be set using setup tool (Configurator ET).
Reference: For details concerning setup procedures, refer to “Control Configurator ET
Operational Guide Book” (ARCT1F341E) and the HELP window of Configurator ET.
E-mails can be sent and received using the ladder program. (Ladder e-mail send function and Ladder
received e-mail check function.).
Data can be read via e-mail using the e-mail send/receive function (“Request Mail function”).
The e-mail function can be used regardless of the auto connection function status. That is, the e-mail
function can be used either the mode setting switch 2 is ON or OFF.
11.1.1 E-mail Function Specification
Item Descriptions
Buffer memory size for storing e-mail
data
Note1
96K bytes
Supported
e-mail
functions
Up to 64
e-mails can
be
registered.
Error Notice
Mail
A fixed message, including error occurrence date, time and
the error code, is sent to the entered destination when an
error is detected in a CPU unit.
Report Mail
E-mail is sent to the entered destination at the specified
intervals (1 to 120 min.) or at an appointed date (Date and
time). Up to three appointed times can be registered.
Device
Watch Mail
Bit device watch (X, Y, R, L T, and C)
Word device watch (WX, WY, WR, WL, DT, SV, EV, FL,
and LD)
Message
only
Message specified in the ladder send e-mail program
E-mail size
A message can be edited within 2000 characters (including
a line feed) every e-mail.
Address Book
Up to 32 addresses can be registered.
“To:”, “Cc:”, and “Bcc:” can be specified.
Signature
User signature: 4 (editable)
Fixed signature: 1
Security for receiving e-mails
A filter can be set for the incoming e-mail using a keyword.
(Sender’s e-mail address, domain name and Subject)
Note1) This size includes the e-mail main message, address book data, and signature data.
Note2) When sending and receiving e-mails, communication with the e-mail server is internally
conducted. Therefore, connection setting for communication with the e-mail server is not necessary.
(E-mail settings using the setup tool (Configurator ET) are required.)
Note3) E-mails that are sent and received do not support the encrypted data and compressed data.
ET-LAN e-mail receive function is supported only by POP.
Note:
The e-mail function is only available with Ver.2.00 or later of ET-LAN unit.