46
Printer Setting (User Preset Mode)
■
■
■
■
■
Following settings become available by touching “09 Key Operator” and
input the Key operator ID number on the menu screen.
OK
00 HDD spool area format
01 Spool function
02 Flash ROM update accept
03 Dump list mode
04 HDD status
No
No
Release
0
1 / 2
User preset mode, printer
Screen
No.
Modes
Initial setting
Function
1/2
00 HDD spool area format
Selection of spool capacity of the hard disk
(HDD)
C
None, 128 MB, 256 MB, 512 MB
01 Spool function
128 MB
03 Dump list mode
No
Selecting to spool the data or not to the
printer HDD when using as network printer.
C
No/Yes
No
Selection to update of the program in the
printer controller from the PC, or not.
C
No/Yes
When selected yes, contact your service
technician.
02 Flash ROM update
accept
Selection to print data code transferred from
the PC.
C
Transfer/Release
When selected release and printed, contact
your service technician.
No
04 HDD status
Selection of capacity/usage area of the hard
disk.
C
HDD capacity, Font area capacity, Font area
usage ratio, Spool area capacity, Spool area
usage ratio.
NOTE
C
To reset the user preset mode, press User Preset key on the printer control panel.
(Key Operator Only)
05 Clear all security job
Selection to clear of the registered all
documents in the hard disk.
C
Stop/Start
Stop
2/2
OK
05 Clear all security job
06
07
08
09
Stop
2 / 2
User preset mode, printer
P46-47-Pos.p65
11/24/99, 4:40 PM
46
