30
Setting up Print Condition
(7) Detail
C
Both PCL5e and PS
are the same screen.
No
Item
Default setting
Setting
For Windows 95/NT 4.0
#
Print to the
following port
LPT1: Printer
port
FILE: creates a file on disk
LPT1: Printer port
$
Print using the
following driver
Display all print
drivers which
selected Regular
Use Printer
Displays the currently selected
default printer.
%
Timeout settings
Displays error indication when its over wait
time setting after transmitting the document
data.
C
Not selected: Waiting time from sending
data to recognize the next data.
C
Transmission retry: After error display,
waiting time after sending
the data to retry.
15
45
&
New Driver
Installing another printer driver.
Following item will be used when using as a network printer.
(
Capture Printer port
Add Port
)
Delete Port
*
End of Capture
+
Spool Settings
-
After spooling the
data from the first
page
Set up the timing when print data is sent to
the printer.
C
After spooling the entire print job
C
After spooling the first page of data
C
Without spool
Port Settings
.
Check the port
condition before
printing
It allows to set the printer port which is using
C
Spool print job of MS-DOS (S)
C
Check port condition before printing (C)
P30-31-Pos.p65
11/24/99, 3:27 PM
30
